产品中心
产品中心
美孚滑脂 XHP 222 特级
来源于:张家港保税区澳博国际贸易有限公司

简 介
美孚滑脂XHP222特级是ISO粘度等级220,NLGI2号含有二硫化钼之极压高级滑脂。美孚滑脂 222 特级采用高品质的复合锂皂基结合具极高粘性的聚合物制造而成。这不单使此产品在严荷的工作环境下,仍然不会软化,并有超卓的粘附性能,使在工作温度界乎20C 至150C(–4至300F)之间,维持硬度一致。本滑脂的抗抛脱能力和密封特性亦非常优良。美孚滑脂XHP 222特级含有百分之0.75 微细形的二硫化钼。此二硫化钼可粘附在金属表面形成保护薄膜,减低摩擦系数。在边界润滑情况下,这薄膜配以极压添加剂发挥防划伤和抗磨保护。其它特性包括出色的水污染忍受性和抗高温氧化能力。用于换油中心的泵送设备亦有良好的泵送性。美孚滑脂XHP 222特级通过美国标准测检方法(ASTM)之D1743腐蚀保护测试,对钢和铜并没有腐蚀作用。
用 途
美孚滑脂XHP222特级可以延长添补滑脂周期,适合推荐用在汽车底盘配件及车轮轴。此产品亦满足船隻,农业.车队及大型工地设备的多用途滑脂的需要。美孚滑脂XHP 222特级主要是推荐用于经常出现滑动和振动情况的悬置轴承,或经有关设备制造商指定含二硫化钼的滑脂。当此产品用在客车和轻卡车的悬置球形节、重型卡车的转向节主锁和拖架的转盘时,都能长期保持有效的润滑油膜使操纵更容易。

Product Descr1ption
Mobilgrease XHP 222 Special is an ISO Grade 220, NLGI No. 2, molybdenum disulfide fortified, extreme-ressure premium grease. Mobilgrease XHP 222 Special is formulated with a high quality lithium complex soap thickener and a special high-tack polymer to ensure good resistance to softening under severe working, xcellent adhesion, and a uniform consistency over the recommended operating temperature range of -20 OC to 150 OC(-4 °OF to 300 OF). Fling-off resistance and sealing properties are also excellent. Mobilgrease XHP 222 Special contains 0.75% micronized molybdenum disulfide that plates-out from the grease and forms an adhering film on metallic surfaces, reducing the coefficient of friction. This film and the extreme-pressure additives provide protection against scoring and wear under boundary lubrication conditions.Other formulation characteristics include superior watertolerance, high temperature oxidation resistance, and good pumpability by service station dispensing systems. Mobilgrease XHP 222 Special passes the ASTM D 1743 Corrosion Protection test and will not corrode steel or copper.
Properties
Mobilgrease XHP 222 Special is an extended lubrication interval grease recommended for the lubrication of automotive chassis fittings and wheel bearings. It also performs well as a multipurpose grease for marine craft,farm, fleet, and contractor equipment.Mobilgrease XHP 222 Special is particularly recommended for heavily loaded suspension bearings where sliding or oscillation occurs, or where the equipment manufacturer specifies a grease containing molybdenum disulfide. It will maintain an effective lubricating film over extended periods and contribute to reduced steering effort when used in the suspension ball joints of assenger cars and light trucks, the kingpins of heavy trucks, and the fifth wheels of tractor trailers.

Characteristics 特 性
以 下 所 列 数 据 除 特 别 注 明 外, 均 为 典 型 值
Typical values unless otherwise stated

NLGI Grade
NLGI 编 号

2

Penetration at 25 OC (77 OF), worked
操作后 针 入 度 @ 25 C ( 77 F )

280

Soap Type
皂 基

Lithium Complex
复 合 锂

Texture
结 构

Smooth/Tacky
光 滑 / 粘性
Color
颜色
Grey Black
灰黑色

Dropping Point 0C (OF)
滴 点 C (OF)

260 (500)

Mineral Oil Viscosity 矿 物 油 粘度cSt @ 40℃
@40 ℃ 厘 斯

220

Corrosion Prevention
防锈保护

Pass 通过

Timken OK Load, lbs
Timken 试 验 负 荷 , 磅

45

Water Washout Loss @79 OC, wt%
水洗测试流失量 @79 OC, 重 量 %

5

Water Spray Off, wt%
喷水测试流失量,重量%

15